Teplocom GSM v1.41 APK (Unlimited Money)

NEW:
- Completely redesign
- The interface has become clearer and more user-friendly
- important information is displayed on the main screen
- To change the settings, you need no longer move to another screen. All settings can be changed on the main screen.
- Added support for smartphones with Android OS 6 and above
- Fixed minor flaws



Tempering can be carried out by two sensors.
thermostating Mode 1 - thermostating produced by the external temperature sensor (boiler) -when the temperature falls below TMIN - boiler - is activated when the boiler temperature is above TMAX off.
Mode 2 - Sensor room temperature - set temperature = support TU.
What controls (If the readings from the device to deviate 1 degree lower than the set mode - the boiler - If included becomes higher by 1 degree -. The boiler is turned off.)

You will receive a SMS alarming and notification:

at loss of 220 V,
when water leakage under the sensor,
when the air temperature is lowered below 17 ° C,
when the heating temperature is lowered below 40 ° C (temperature thresholds can be changed).


The controls:

- change of temperature response thresholds
- Balance Inquiry SIM card informant
- to enable or disable the boiler

Carefully read the instruction manual.

Attention! There is no correct work with operator - MTS (SMS comes with a huge delay).